P1495 Infiniti EVAP Leak Detection Pump Solenoid Circuit Condition

P1495 Infiniti EVAP Leak Detection Pump Solenoid Circuit Condition

Possible causes

– Leak Detection Pump (LDP) harness is open or shorted
– Leak Detection Pump (LDP) poor electrical connection
– Faulty Leak Detection Pump (LDP)

What about the obd code?

Malfunction is detected when the Powertrain Control Module (PCM) detected the pump solenoid did not change status when activated,

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)
– Possible a noticeable fuel odor caused by the release of fuel vapors

P1495 Infiniti Description

The Evaporative emissions system is design to prevent the escape of fuel vapors from the fuel system. Leaks in the system, ca allow vapors to escape into the atmosphere. The leak detection system tests for EVAP system leaks and blockage.

During the self-diagnostics, the Powertrain Control Module (PCM) first checks the Leak Detection Pump (LDP) for electrical and mechanical faults. If the first checks pass, the PCM then uses the LDP to seal the vent valve and pump air into the system to pressurize it. If a leak is present, the PCM will continue pumping the LDP to replace the air that leaks out. The PCM determines the size of the leak based on how fast/long it must pump the LDP as it tries to maintain pressure in the system.

Infiniti Vehicle:Infiniti EX35,Infiniti FX35,Infiniti FX50,Infiniti G25,Infiniti G37,Infiniti M35,Infiniti M37,Infiniti M56,Infiniti QX562013 Infiniti,2012 Infiniti,2011 Infiniti,2010 Infiniti,2009 Infiniti,2008 Infiniti,2007 Infiniti,2006 Infiniti,2005 Infiniti,2004 Infiniti,2003 Infiniti,2002 Infiniti,2001 Infiniti,2000 Infiniti,1999 Infiniti,1998 Infiniti,1997 Infiniti,1996 Infiniti,