P1682 Infiniti Ignition 1 Switch Circuit 2
Possible causes
– Faulty ignition switch
– Ignition Switch harness is open or shorted
– Ignition Switch circuit poor electrical connection
– Faulty Engine Control Module (ECM)
– Ignition Switch harness is open or shorted
– Ignition Switch circuit poor electrical connection
– Faulty Engine Control Module (ECM)
What about the obd code?
The ECM has detected a voltage deifference between two circuits
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Possible no crank or start
– Possible no crank or start
P1682 Infiniti Description
There are 2 ignition 1 voltage circuits supplied to the Engine Control Module (ECM). The first ignition circuit is provided by the powertrain relay, through a fuse. This ignition 1 voltage circuit supplies power to all the internal ECM circuits associated with the throttle actuator control (TAC) operation. The second ignition 1 voltage circuit is supplied by the run/crank relay through a fuse, and is used to power the remaining internal ECM circuits. If the ECM detects a voltage difference between the 2 ignition 1 voltage circuits, DTC P1682 Infiniti will set.
Infiniti Vehicle:Infiniti EX35,Infiniti FX35,Infiniti FX50,Infiniti G25,Infiniti G37,Infiniti M35,Infiniti M37,Infiniti M56,Infiniti QX562013 Infiniti,2012 Infiniti,2011 Infiniti,2010 Infiniti,2009 Infiniti,2008 Infiniti,2007 Infiniti,2006 Infiniti,2005 Infiniti,2004 Infiniti,2003 Infiniti,2002 Infiniti,2001 Infiniti,2000 Infiniti,1999 Infiniti,1998 Infiniti,1997 Infiniti,1996 Infiniti,