P0788 Isuzu 3-2 Shift Solenoid Control Circuit High Voltage
Possible causes
– Low transmission fluid level
– Dirty transmission fluid
– Faulty shifting solenoid valve
– Shifting solenoid valve harness is open or shorted
– Shifting solenoid valve circuit poor electrical connection
– Dirty transmission fluid
– Faulty shifting solenoid valve
– Shifting solenoid valve harness is open or shorted
– Shifting solenoid valve circuit poor electrical connection
What about the obd code?
Code P0788 Isuzu is detected when the Engine Control Module (ECM) detects open in solenoid valve ST circuit 4 times when solenoid valve ST is operated
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P0788 Isuzu Description
Shift solenoid valve ST is switched ON OFF by a signal from Engine Control Module (ECM) so that let in or out timing of 2nd brake is adjusted by operating orifice control valve. Therefore, shift solenoid valve ST operates when letting in or out reverse clutch.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender