P1101 Isuzu HO2S11 Sensor Circuit Voltage Too Low Air Leak
Possible causes
– Faulty Mass Air Flow Sensor
– Air leak before or after sensor
– Mass Air Flow Sensor harness is open or shorted
– Mass Air Flow Sensor circuit poor electrical connection
– Air leak before or after sensor
– Mass Air Flow Sensor harness is open or shorted
– Mass Air Flow Sensor circuit poor electrical connection
What about the obd code?
The Engine Control Module (ECM) detected a Mass Air Flow (MAF) sensor signal above or below calibrated limit
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1101 Isuzu Description
The Mass Air Flow (MAF sensor circuit is monitored by the Powertrain Control Module (PCM) for an out of range air flow (or voltage) input. If during key ON engine OFF the air flow voltage signal is greater than 0.27 volts the test fails. Likewise, if during key ON engine running, an air flow voltage signal is not within 0.46 volt to 2.44 volts, the test fails.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender