P0120 Lexus Throttle Pedal Position Sensor/Switch A Circuit Malfunction

P0120 Lexus Throttle Pedal Position Sensor/Switch A Circuit Malfunction

Possible causes

– Faulty Throttle Position Sensor
– Throttle Position Sensor circuit is open or shorted
– Throttle Position Sensor poor electrical connection

What about the obd code?

Malfunction is detected when an excessively low or high voltage from the sensor is sent to Engine Control Module (ECM).

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)

P0120 Lexus Description

The throttle position sensor (TPS) responds to the accelerator pedal movement. This sensor is a kind of potentiometer which transforms the throttle position into output voltage, and emits the voltage signal to the Engine Control Module (ECM). In addition, the sensor detects the opening and closing speed of the throttle valve and feeds the voltage signal to the ECM.

Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.

Lexus Vehicle:Lexus ES,Lexus GS,Lexus GX,Lexus HS,Lexus IS,Lexus LFA,Lexus LS,Lexus LX,Lexus RX,Lexus RX,Lexus SC,Lexus GS350,Lexus GS450H,Lexus IS250,Lexus GX460,Lexus IS350,Lexus LS460,Lexus LS600H,Lexus LX570,Lexus RX350