P0382 Audi Glow Plug/Heater Circuit B Malfunction
Possible causes
– Faulty Glow Plug
– Glow Plug harness is open or shorted
– Glow Plug circuit poor electrical connection
– Glow Plug harness is open or shorted
– Glow Plug circuit poor electrical connection
What about the obd code?
– The glow plugs are commanded OFF and the glow plug feedback is more than 2 volts. or
– The glow plugs are commanded on and the glow plug feedback is not between 5 volts and 6.2 volts.
– The glow plugs are commanded on and the glow plug feedback is not between 5 volts and 6.2 volts.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– The engine may be harder to start
– The engine may be harder to start
P0382 Audi Description
The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. The glow plugs are heated before and during cranking, as well as initial engine operation. The engine control module (ECM) controls the glow plug ON times by monitoring coolant temperature and glow plug voltage. The California Glow Plug system has eight individual glow plug supply circuits between the controller and the glow plugs. If the feedback voltage from the controller to the ECM is not within range, DTC P0380 Audi will set.
Audi Vehicle:Audi A1,Audi A3,Audi A1,Audi A3,Audi A1,Audi A3,Audi A4,Audi A5,Audi Q3,Audi A5,Audi Q5,Audi A3,Audi A4,Audi A5,Audi TT,Audi Q3,Audi Q5,Audi S3,Audi TTS,Audi RS 3,Audi TT RS,Audi A7,Audi Q7,Audi A8,Audi A6,Audi S4,Audi S5,Audi Q5,Audi S6,Audi S8,Audi S5,Audi A8,Audi R8 V8,Audi RS 5,Audi S6,Audi R8 V10,Audi R8 GT,Audi A8L