P1259 Mitsubishi VTEC System Malfunction
Possible causes
– Low engine oil pressure or level
– Open or short circuit condition
– Faulty VTEC oil pressure switch
– Faulty VTEC solenoid
– Open or short circuit condition
– Faulty VTEC oil pressure switch
– Faulty VTEC solenoid
What about the obd code?
The P1259 Mitsubishi is set when there is a problem in the VTEC Oil Pressure Switch circuit or VTEC Solenoid Valve circuit
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1259 Mitsubishi Description
The VTEC system activates the VTEC solenoid valve by command from the powertrain control module (PCM), and it charges/discharges the hydraulic circuit of the VTEC mechanism that is installed in the valve system to switch valve timing between Low and High. The PCM monitors oil pressure conditions in the hydraulic circuit of the VTEC mechanism according to the VTEC oil pressure switch downstream of the VTEC solenoid valve. If there is a disparity between oil pressure condition in the hydraulic circuit that is determined by the PCM command, and the oil pressure condition that is determined by the status of the VTEC oil pressure switch, the system is considered faulty and a DTC is stored.
Mitsubishi Vehicle:Mitsubishi Aspire,Mitsubishi Airtrek,Mitsubishi Adventure,Mitsubishi Galant,Mitsubishi Tredia,Mitsubishi Strada,Mitsubishi RVR,Mitsubishi Pajero,Mitsubishi Outlander,Mitsubishi Montero Sport,Mitsubishi Mirage,Mitsubishi Libero,Mitsubishi Legnum,Mitsubishi Lancer,Mitsubishi i Miev,Mitsubishi GTO,Mitsubishi FTO,Mitsubishi Eterna,Mitsubishi eK,Mitsubishi Eclipse,Mitsubishi Diamante,Mitsubishi Delica,Mitsubishi Cordia,Mitsubishi Chariot,Mitsubishi Challenger,Mitsubishi Carisma,Mitsubishi Eclipse,Mitsubishi Endeavor,Mitsubishi Galant,Mitsubishi Lancer,Mitsubishi Outlander,Mitsubishi Raider,