P2118 Audi Throttle Actuator Control Motor Current Range/Performance
Possible causes
– Faulty Throttle Actuator Control Actuator
– Electronic Throttle Control System (ETCS) harness is open or shorted
– Electronic Throttle Control System (ETCS) circuit poor electrical connection
– Electronic Throttle Control System (ETCS) harness is open or shorted
– Electronic Throttle Control System (ETCS) circuit poor electrical connection
What about the obd code?
The Engine Control Module (ECM) monitors the battery supply voltage applied to the electronic throttle actuator. When the power supply voltage drops below the threshold, the ECM concludes that the power supply circuit has an open circuit. A DTC is set and the MIL is turned on.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P2118 Audi Description
The Electronic Throttle Control System (ETCS) has a dedicated power supply circuit. The voltage (+BM) is monitored and when the voltage is low (less than 4 V), the Engine Control Module (ECM) concludes that the ETCS has a fault and current to the throttle actuator is cut. When the voltage becomes unstable, the ETCS itself becomes unstable. For this reason, when the voltage is low, the current to the actuator is cut. If repairs are made and the system has returned to normal, turn the ignition switch OFF. The ECM then allows current to flow to the actuator and actuator can be restarted.
Audi Vehicle:Audi A1,Audi A3,Audi A1,Audi A3,Audi A1,Audi A3,Audi A4,Audi A5,Audi Q3,Audi A5,Audi Q5,Audi A3,Audi A4,Audi A5,Audi TT,Audi Q3,Audi Q5,Audi S3,Audi TTS,Audi RS 3,Audi TT RS,Audi A7,Audi Q7,Audi A8,Audi A6,Audi S4,Audi S5,Audi Q5,Audi S6,Audi S8,Audi S5,Audi A8,Audi R8 V8,Audi RS 5,Audi S6,Audi R8 V10,Audi R8 GT,Audi A8L