P1491 Toyota Exhaust Gas Recirculation Valve Insufficient Lift
Possible causes
– Vacuum cut valve bypass valve
– Vacuum cut valve
– Bypass hoses for clogging
– EVAP control system pressure sensor and circuit
– EVAP canister vent control valve
– Hose between fuel tank and vacuum cut valve clogged
– Hose between vacuum cut valve and EVAP canister clogged
– EVAP purge port of fuel tank for clogging
– Vacuum cut valve
– Bypass hoses for clogging
– EVAP control system pressure sensor and circuit
– EVAP canister vent control valve
– Hose between fuel tank and vacuum cut valve clogged
– Hose between vacuum cut valve and EVAP canister clogged
– EVAP purge port of fuel tank for clogging
What about the obd code?
Vacuum cut valve bypass valve does not operate properly.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1491 Toyota Description
The vacuum cut valve and vacuum cut valve bypass valve are installed in parallel on the EVAP purge line between the fuel tank and the EVAP canister.
The vacuum cut valve prevents the intake manifold vacuum from being applied to the fuel tank. The vacuum cut valve bypass valve is a solenoid type valve and generally remains closed. It opens only for on board diagnosis.
The vacuum cut valve bypass valve responds to signals from the ECM. When the ECM sends an ON (ground) signal, the valve is opened. The vacuum cut valve is then bypassed to apply intake manifold vacuum to the fuel tank..
Toyota Vehicle:Toyota Prius,Toyota Celica,Toyota Supra,Toyota Carina,Toyota Camry,Toyota MR2,Toyota Aygo,Toyota 4Runner,Toyota Avalon,Toyota Camry,Toyota Corolla,Toyota FJ Cruiser,Toyota Highlander,Toyota Land Cruiser,Toyota Matrix,Toyota Prius,Toyota RAV4,Toyota Sequoia,Toyota Sienna,Toyota Solara,Toyota Tacoma,Toyota Tundra,Toyota Yaris,