P0360 Buick Ignition Coil 10 Primary/Secondary Circuit Malfunction
Possible causes
– Faulty Ignition Coil 10
– Ignition Coil 10 harness is open or shorted
– Ignition Coil 10 circuit poor electrical connection
– Faulty Engine Control Module (ECM)
– Ignition Coil 10 harness is open or shorted
– Ignition Coil 10 circuit poor electrical connection
– Faulty Engine Control Module (ECM)
What about the obd code?
Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Lack/Loss of Power
– Engine may be harder to start
– Engine hesitation
– Rough engine idle
– Lack/Loss of Power
– Engine may be harder to start
– Engine hesitation
– Rough engine idle
P0360 Buick Description
The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
Buick Vehicle:Buick Regal – ?Buick Riviera – ?Buick LaCrosse – ?David Dunbar Buick – Buick Century – Buick LaCrosse – Buick LeSabre – Buick Lucerne – Buick Park Avenue – Buick Regal – Buick Verano – Buick Enclave – Buick Encore – Buick Rainier – Buick Rendezvous – Buick Terraza – Buick Riviera