C0047 · نشرات الشركة المصنعة

FORD · 2023-10-24

Some 2023 F-Super Duty vehicles equipped with vacuum assist brakes and built on or before 01-Aug-2023 may exhibit an illuminated brake warning indicator with diagnostic trouble codes (DTC) C0047 and/or P0557 present. This may be due to the brake vacuum sensor. To correct the condition, remove and replace the brake vacuum sensor, part NK4Z-2C444-A. To prevent repeat concerns, install the sensor with the electrical connector pointed towards the identification label on the vacuum brake booster.

FORD · 2023-04-15

Some 2023 F-Super Duty vehicles equipped with vacuum assist brakes may exhibit an illuminated brake warning indicator with diagnostic trouble codes (DTC) C0047 and/or P0557 present. This may be due to the brake vacuum sensor. To correct the condition, remove and replace the brake vacuum sensor, part NK4Z-2C444-A. To prevent repeat concerns, install the sensor with the electrical connector pointed towards the identification label on the vacuum brake booster.

FORD, LINCOLN · 2020-07-31

Some 2020 Explorer/Aviator vehicles built on or before 15Jul-2020 may exhibit a perceived soft/low brake pedal at initial vehicle start up with diagnostic trouble code (DTC) C0047:64 stored in the anti-lock brake system (ABS) module. The vehicle may also exhibit an illuminated ABS, Advance Trac, and/or red brake warning lamp, and possible Advance Trac Fault message displayed. This may be due to the software in the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 2005 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD, LINCOLN · 2020-07-10

Some 2020 Explorer/Aviator vehicles may exhibit a perceived lack of power brake assist or extended brake pedal travel at initial vehicle start up with diagnostic trouble code (DTC) C0047:64 stored in the anti-lock brake system (ABS) module. The vehicle may also exhibit an illuminated ABS, Advance Trac, and/or red brake warning lamp, and possible Advance Trac Fault message displayed. This may be caused by the software in the ABS module. To correct the condition, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 2005 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.