C0460 · نشرات الشركة المصنعة

CHEVROLET, PONTIAC, SATURN · 2018-11-01

This engineering informational bulletin is requesting information on electric power steering loss of assist with DTCs C0545 and/or C0460 set.

CADILLAC, GMC · 2017-10-02

This technical bulletin provides a procedure to reprogram the power steering control module to correct a condition of Reduced Steering Assist Message with DTC C0460 Sym 5A due to a software abnormality.

CADILLAC, GMC · 2017-10-01

Reduced Steering Assist Message with DTC C0460 Sym 5A Condition Some customers may comment on a Reduced Steering Assist message on the DIC with no loss of steering assist. During diagnosis a technician may find DTC C0460 Sym 5A. Cause The condition is due to Steering Angle Sensor trim error. Note: The calibration allows for an error to set without actual loss of assist. Correction Reprogram the Power Steering Control Module.

CHEVROLET · 2016-05-10

This technical bulletin provides a procedure to reset the steering angle sensor to correct a customer concern that the traction control system (stabilitrak) light is on and DTC C0460 set caused by to a brief low voltage incident.

LOTUS · 2013-04-30

Instances of ABS (Anti-Lock Braking System) tell tale lamp illumination accompanied with fault code C0460 (pressure sensor failure) have been reported back to Lotus Cars. Although the pressure sensor located within the ABS module is non-serviceable; another potential cause of this problem is the brake light switch plunger being incorrectly set. Incorrect setting of the switch plunger will result in the ABS brake line pressure being too high at the time of brake light activation, thus generating a fault code and illuminating the ABS or Service tell tale lamp.

LOTUS · 2013-04-30

LOTUS: DUE TO FAULT CODE C0460 (PRESSURE SENSOR FAILURE) TAIL LAMP OF ABS (ANTILOCK BRAKING SYSTEM) WILL ILLUMINATE AND A POTENTIAL CAUSE IS BRAKE LIGHT SWITCH PLUNGER INCORRECTLY SET. MODEL ELIXE, EXIGE, EVORA. NO MODEL YEARS. *PE

PONTIAC, SATURN · 2007-11-01

ELECTTRONIC STABILITY CONTROL (ESC) SYSTEM OR TRACTION CONTROL SYSTEM (TCS) WARNING LAMP ON, DTC C0460 SET (UPDATE ESC MODULE SOFTWARE). *NJ

CHEVROLET, PONTIAC · 2007-11-01

NOISY STEERING COLUMN, LACK OF POWER STEERING ASSIST, DIAGNOSTIC TROUBLE CODES C0460 AND C0545, STEERING WHEEL MOVES SLIGHTLY BY ITSELF. *MJ (REPLACE STEERING COLUMN) UPDATED 01/18/08. *NJ

CHEVROLET, PONTIAC · 2007-10-01

INFORMATION ON ELECTRONIC BRAKE CONTROL MODULE SET DTC'S C0252/C0460 AND POWER STEERING CONTROL MODULE SET DTC'S C056E/C0460/C0545. *NJ

BUICK, CHEVROLET, PONTIAC, SATURN · 2005-11-11

A STALL AND/OR NO CRANK, NO START CONDITION AFTER THE WIPERS ARE USED. THE SERVICE ENGINE SOON LIGHT MAY OR MAY NOT BE ILLUMINATED AND THE CUSTOMER MAY REPORT OTHER PROBLEMS WITH THE CRUISE CONTROL SYSTEM. A TECH 2 DIAGNOSTIC PROBE WILL FIND NUMEROUS DTCS WHICH COULD INCLUDE P0608 CRUISE CONTROL, C0460, C0461 STEERING WHEEL SENSOR CODES, AND POSSIBLY A NO COMMUNICATION ISSUE WITH THE PCM. ENGINEERING HAS DETERMINED THE WIPER MOTOR CRANK ARM IS CONTACTING THE UBEC WIRING HARNESS AND CUTTING THE WIRES. *TT

CHEVROLET · 2004-05-18

INTERMITTENT LACK OF POWER STEERING ASSIST WITH OR WITHOUT DIAGNOSTIC TROUBLE CODES, SERVICE VEHICLE SOON LIGHT ON WITH DIAGNOSTIC TROUBLE CODES C0545 AND SYMPTOM CODE 00, OR C0460 AND SYMPTOM CODE 00, OR THAT THE STEERING WHEEL WILL MOVE BACK AND FORTH BY ITSELF. GM VOICEMAIL EXPRESS. *TT