P161F · نشرات الشركة المصنعة

NISSAN · 2024-07-19

DTC P161F FOR IMMOBILIZER CODE STORED IN ECM WITH VEHICLE NO-START CONDITION APPLIED VEHICLES: APPLIED DATES: 2022-2023 Pathfinder (R53) Built on or before October 17, 2022 IF YOU CONFIRM The vehicle cranks but will not start, and DTC P161F for “IMMOBILIZER” is stored in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to reprogram the ECM, if applicable. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.

INFINITI · 2024-07-19

DTC P161F FOR IMMOBILIZER CODE STORED IN ECM WITH VEHICLE NO-START CONDITION APPLIED VEHICLES: APPLIED DATES: 2022-2023 QX60 (L51) Built on or before October 17, 2022 IF YOU CONFIRM The vehicle cranks but will not start, and DTC P161F for “IMMOBILIZER” is stored in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to reprogram the ECM, if applicable. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.

NISSAN · 2024-04-24

DTC P161F FOR IMMOBILIZER CODE STORED IN ECM WITH VEHICLE NO-START CONDITION IF YOU CONFIRM The vehicle cranks but will not start, and DTC P161F for “IMMOBILIZER” is stored in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to reprogram the ECM, if applicable.

INFINITI · 2024-04-24

DTC P161F FOR IMMOBILIZER CODE STORED IN ECM WITH VEHICLE NO-START CONDITION IF YOU CONFIRM The vehicle cranks but will not start, and DTC P161F for “IMMOBILIZER” is stored in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to reprogram the ECM, if applicable.

NISSAN · 2020-04-23

2020 SENTRA; REMOTE ENGINE START STOPS RESPONDING AND DTC P161F STORED SERVICE INFORMATION The remote engine start (RES) may stop responding and DTC P161F will store in the ECM if RES is performed more than once in quick succession. EXAMPLE: 1. The RES is activated, 2. The ignition is turned OFF; either by RES timer or directly by the start button or key, 3. Within 10 seconds of performing steps 1 and 2, the ignition is turned ON with the RES, start button or key. - When using the RES feature, at least 10 seconds, or more, must elapse between ignition cycles. - If DTC P161F is stored, erase the DTC and Do Not replace the ECM. NOTE: If a customer states the RES stopped responding on a third consecutive activation attempt, please inform them the vehicle allows the RES to be performed only…

HINO · 2016-07-15

General - cab over engine trucks 155, 155h, 195, or 195h Enhanced software is available for the VCS module to correct false detection of DTC P161F-Malfunction of Act uator Relay, when a low voltage condition is present.

HINO · 2016-07-15

SB-16-018 Enhanced software is available for the VCS module to correct false detection of DTC P161F -Malfunction of Actuator Relay, when a low voltage condition is present.