P164C · نشرات الشركة المصنعة

FORD · 2023-05-08

Some 2022-2023 Bronco Sport and Maverick vehicles built on 04-Sep-2022 and through 30-Dec-2022 may exhibit the engine not restarting after an auto start/stop event with diagnostic trouble code (DTC) P164C stored in the powertrain control module (PCM). The malfunction indicator lamp (MIL) may also become illuminated after the vehicle experiences a second event before it can be brought in for service. This may be due to an internal issue with the PCM. To correct the condition, check the battery condition and state of charge, then replace the PCM and re-evaluate the concern. For claiming, use causal part 12A650 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. If the concern persists, refer to Workshop Manual, Section 303-14B and perform…

FORD, LINCOLN · 2023-05-05

Some 2017-2020 F-150 and 2018-2020 Expedition/Navigator vehicles built on or before 30-Nov-2019 and equipped with a 3.5L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. Some vehicles may also exhibit an intermittent condition with no auto restart during auto-start-stop operation with or without diagnostic trouble code (DTC) P164C present in the powertrain control module (PCM). This may be due to a worn variable camshaft timing (VCT) unit. To correct the condition, follow the Service Procedure to replace the VCT units.

FORD · 2022-10-19

Some 2019-2021 F-150 vehicles built on or before 04-Mar-2021 and equipped with a 5.0L engine may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0171, P0172, P0174, P0175, P0364, P060B, P062B, P1104, P164C, P2601, P2BEC, P2BED, P2BEE, P2BEF, P2BF0, P2BF1, P2BF2 and/or P2BF3 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

FORD · 2021-11-30

Some 2021 EcoSport vehicles equipped with a 1.0L EcoBoost engine may exhibit a condition where the auto start/stop system is inoperative or cruise control disabled with an illuminated powertrain malfunction (wrench) and/or brake warning indicator with diagnostic trouble code (DTC) P164C or P0504 stored in the powertrain control module (PCM). The vehicle may also exhibit an engine stall while braking aggressively from low speed with an auto start/stop indicator lamp flashing and a battery indicator lamp on with a shift to park message in the instrumental panel cluster (IPC). This may be due to the software in the PCM. To correct this condition, follow the Service procedure to reprogram the PCM.

FORD · 2021-07-14

Some 2021 EcoSport vehicles equipped with a 2.0 L engine and built on or before 26-Jun-2021 may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P164C stored in the powertrain control module (PCM). The vehicle may also exhibit Auto Start/Stop system incorrect operation and/or insufficient heat in Auto Start/Stop mode only. This may be due to the software in the PCM. To correct this condition, follow the Service procedure to reprogram the PCM.

FORD · 2021-05-18

Some 2021 F-150 vehicles equipped with a 5.0L engine and built on or before 04-Mar-2021 may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0364, P060B, P062B, P164C, P2601, P0171, P0172, P0174, P0175 and/or P1104 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

FORD · 2021-03-22

Some 2021 F-150 vehicles equipped with a 5.0L engine and built on or before 08-Mar-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0364, P060B, P062B, P164C, P2601, P0171, P0172, P0174, P0175, P3450 and/or P1104 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

FORD · 2021-03-03

Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine and built on or before 15-Feb-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostics trouble code (DTC) P2C23, P2601, P164C, P060B and/or U0288 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.

FORD, LINCOLN · 2019-06-18

Some 2018-2019 Escape vehicles built on 01-Aug-2018 and through 14-May-2019 or 2019 MKC vehicles built on or before 14-May-2019 equipped with a 2.0L engine may exhibit an auto start/stop, no auto restart concern with diagnostic trouble code (DTC) P164C. A revised crankshaft position sensor (CKP) JX6Z-6C315-B is available. Refer to the Workshop Manual (WSM), Section 303-14A. For claiming, use causal part 6C315 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD, LINCOLN · 2019-05-08

Some 2019 Fusion, 2018-2019 MKZ vehicles equipped with a 2.0L engine may exhibit an auto start/stop, no auto restart concern with diagnostic trouble code (DTC) P164C. A revised crankshaft position (CKP) sensor JX6Z-6C315-B is available. Refer to the Workshop Manual (WSM), Section 303-14B for Fusion and Section 303-14A for MKZ. For claiming, use causal part 6C315 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD, LINCOLN · 2019-04-16

SSM 47937 - 2019 MKC, 2018-2019 Escape - 2.0L - Auto Start/Stop - No Auto Restart After An Auto Stop Event With DTC P164C Some 2018-2019 Escape vehicles built on or after 01-Aug-2018 or 2019 MKC vehicles equipped with a 2.0L engine may exhibit an auto start/stop, no auto restart concern with diagnostic trouble code (DTC) P164C. A revised crankshaft position sensor (CKP) JX6Z-6C315-B is available. Refer to the Workshop Manual (WSM), Section 303-14A. For claiming, use causal part 6C315 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2017-04-07

Some 2017 F-150 vehicles equipped with a 3.5L GTDI engine and built on or before 01-Mar-2017 may exhibit an illuminated malfunction indicator lamp (MIL)with DTC P164C stored in the powertrain control module (PCM) memory. Follow the Service Procedure Steps to correct the condition.

FORD · 2016-05-24

SOME 2017 ESCAPE VEHICLES EQUIPPED WITH A 1.5L GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) ENGINE AND BUILT ON OR BEFORE 5/11/2016 MAY EXHIBIT DIAGNOSTIC TROUBLE CODE (DTC) P164C STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY WITH AN ILLUMINATED CHECK ENGINE LIGHT, LACK OF POWER AND/OR NO AUTOMATIC ENGINE RESTART AFTER AN EXTENDED STOPSTART EVENT.