عرض

P2074 · نشرات الشركة المصنعة

إدراج السيارة هو نقطة بداية للبحث. تحقق من المحرك وفترة الإنتاج والبرمجيات في معلومات الشركة المصنعة.

P2074 ← ماذا يعني هذا الرمز؟

14 النتائج

22N14 S1 ↗

FORD · 2024-01-11

Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074 Adding owner letter and corrected dealer bulletin. First Part submitted 11/01/23

23B63 ↗

FORD · 2023-12-13

Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074

22N14 S1 ↗

FORD · 2023-10-24

Customer Satisfaction Program 22N14 – Supplement #1 Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine - State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074

TSB 22-2115 ↗

FORD · 2022-03-24

Some 2011-2012 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P2073 and/or P2074 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.

22-01-018H ↗

HYUNDAI · 2022-02-03

Certain 2020-22MY Sonata (DN8a) and 2021-22MY Santa Fe (TMa) vehicles equipped with 2.5L engine may exhibit a MIL with DTC(s): • P2074: Mass Airflow Sensor Plausibility • P2074F0: Manifold Absolute Pressure/Mass Air Flow - Throttle Position Correlation at Lower Load • P2074F1: Manifold Absolute Pressure/Mass Air Flow - Throttle Position Correlation at Medium or High Load Secondary DTC(s) below may also be stored: • C136081: ESP Irreversible Error • C161308: CAN Signal Error EMS • C161386: CAN Signal Error EMS • C169381: Blind-Spot Collision Warning – CAN signal failure - ESC • C174181: ESC Not Available VSM (Check ESC) • C183586: CAN Message Failure ESC/IEB Vehicles diagnosed with DTC(s) may also experience reduced engine performance and limited power reduction mode. The ECM software…

21-01-075H ↗

HYUNDAI · 2021-12-09

Certain 2020-22MY Sonata (DN8a), 2021-22MY Santa Fe (TMa), and 2022MY Tucson (NX4/NX4a) vehicles equipped with 2.5L engine may exhibit a MIL with DTC(s): • P2074: Mass Airflow Sensor Plausibility • P2074F0: Manifold Absolute Pressure/Mass Air Flow - Throttle Position Correlation at Lower Load • P2074F1: Manifold Absolute Pressure/Mass Air Flow - Throttle Position Correlation at Medium or High Load Secondary DTC(s) below may also be stored: • C136081: ESP Irreversible Error • C161308: CAN Signal Error EMS • C161386: CAN Signal Error EMS • C169381: Blind-Spot Collision Warning – CAN signal failure - ESC • C174181: ESC Not Available VSM (Check ESC) • C183586: CAN Message Failure ESC/IEB Vehicles diagnosed with DTC(s) may also experience reduced engine performance and limited power reduction…

TSB 19-2343 ↗

FORD · 2019-11-18

This message is superseding TSB 19-2271 to update the Issue, Action and Service Procedure. Some 2017-2018 F-Super Duty and 2019 F-Super Duty F-450/F-550 Chassis Cab only vehicles equipped with a 6.7L engine built on or before 9-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2074, P0401, P0402 and/or P0170. This may be due to various strategies within the powertrain control module (PCM) software. To correct the condition, follow the Service Procedure steps to reprogram the PCM and perform a mass air flow (MAF) parameter reset.

TSB 19-2271 ↗

FORD · 2019-09-06

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine built on or before 9-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2074, P0401, P0402 and/or P0170. This may be due to various strategies within the powertrain control module (PCM) software. To resolve this condition, follow the Service Procedure steps to reprogram the PCM and perform a mass air flow (MAF) parameter reset.

TSB19-2160 ↗

FORD · 2019-05-22

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine built on or before 9-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2074, P0401, P0402 and/or P0170. This may be due to various strategies within the powertrain control module (PCM) software. To resolve this condition, follow the Service Procedure steps to reprogram the PCM and perform a mass air flow (MAF) parameter reset. Follow the service procedure steps to correct the condition.

TSB 19-2112 ↗

FORD · 2019-04-12

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine built on or before 9-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2074 and/or P0170. This may be due to various strategies within the powertrain control module (PCM) software. To resolve this condition, reprogram the PCM and perform a mass air flow (MAF) parameter reset.

TSB 19-2029 ↗

FORD · 2019-02-11

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine built on or before 9-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P2074 and/or P0170. Follow the Service Procedure steps to correct the condition.

SSM 47597 ↗

FORD · 2018-10-22

Some 2013-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox > Powertrain > Service Functions > Reset/Clear Specified Function > Reset/Clear Functions > MAF Sensor. Engineering is investigating. Monitor OASIS for updates.

SSM 47541 ↗

FORD · 2018-09-21

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox - Powertrain - Service Functions - Reset/Clear Specified Function - Reset/Clear Functions - MAF Sensor. Engineering is investigating. Monitor OASIS for updates.

1804204 ↗

CHRYSLER, DODGE, JEEP · 2004-11-18

DRIVEABILITY IMPROVEMENTS OR MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION WITH DIAGNOSTIC TROUBLE CODES P2074. FLASH. *TT