P2452 · نشرات الشركة المصنعة

FORD · 2020-05-12

Some 2018-2019 Transit vehicles equipped with a 3.2L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2452 and P2453 stored in the powertrain control module (PCM). This may be due to the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.

FORD · 2020-03-13

SSM 48633 - 2018-2019 Transit - 3.2L Diesel Engine - Illuminated Malfunction Indicator Lamp (MIL) With Diagnostic Trouble Code (DTC) P2452 And/Or P2453 Some 2018-2019 Transit vehicles equipped with a 3.2L diesel engine may experience an illuminated MIL with DTC P2452 and/or P2453 stored in the powertrain control module (PCM). Engineering is working to implement a solution for this condition. In the interim, clear the DTCs with the appropriate Ford scan tool. Advise the customer that a repair is expected to be available mid-May 2020 and that the condition has no effect on vehicle operation or long term durability. Dealers are asked to follow-up with their customers to schedule a service appointment once a TSB is published.

FORD · 2019-01-02

Some 2017-2018 F-Super Duty vehicles equipped with a 6.7L engine built on or before 18-Apr-2018 may exhibit an illuminated malfunction indicator lamp (MIL) with DTC P244A and/or P2452. This may be due to a malfunction of the diesel particulate filter (DPF) differential pressure sensor. Follow the Service Procedure steps to correct the condition.

FORD · 2018-07-20

Some 2017-2018 F-Super Duty vehicles equipped with a 6.7L engine built on or before 18-Apr-2018 may exhibit an illuminated malfunction indicator lamp (MIL) with DTC P244A and/or P2452. This may be due to a malfunction of the diesel particulate filter (DPF) differential pressure sensor. Follow the Service Procedure steps to correct the condition.

FORD · 2018-07-09

When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset.