Skip to content

FORD

SSM 46526

2017-04-13 · NHTSA 10109014

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Some 2016-2017 F-150 vehicles equipped with a 3.5L gasoline turbocharged direct injection (GTDI) or 5.0L engine may experience low or no oil pressure indication on the oil pressure gauge with diagnostic trouble code (DTC) P0521,P0522, P0523 and/or P0524 stored in the powertrain control module (PCM) memory. This may be due to liquid contamination inside the engine oil pressure sensor connector. If evidence of liquid contamination is found, replace the oil pressure sensor. Inspect the connector seals on C1657 of the 12C508 engine harness for damage and repair as necessary. Do NOT use di-electric grease in the sensor electrical connector. For claiming, use causal part 9D290 and applicable labor operation in section 9 of the service labor time standard (SLTS) manual.

NHTSA manufacturer communications ↗

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.