NISSAN

NTB17-123

2017-12-11 · NHTSA 10127453

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

2018 ALTIMA AND SENTRA; DO NOT ERASE DTC P0315 This bulletin applies to vehicles equipped with a 4-cyl (non-turbo) engine only. SERVICE INFORMATION If DTC P0315 is stored on an Applied Vehicle, do not erase it. If DTC P0315 is stored, the description on the CONSULT-III plus screen will be listed as: (TBD) Crankshaft Position System Variation Not Learned. If you find DTC P0315 stored, please note the following: - Do not erase the DTC. - It will not turn ON the MIL. - No diagnosis or repair is necessary. - It will clear itself after a few trips with normal operation of the vehicle. NOTE: If DTC P0315 is erased with C-III plus, the ECM will restart the learning pattern: - The DTC may be stored again before the learning/driving pattern is complete. - The MIL will not come ON. - The DTC will clear itself after a few trips with normal operation of the vehicle.

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.