Skip to content

INFINITI

ITB18-009

2018-02-27 · NHTSA 10130486

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED IF YOU CONFIRM MIL is ON with one or both of the following DTCs: -P34A5 (A camshaft posi actuator temp sens B1) -P34A9 (A camshaft posi actuator temp sens B2) And Outside ambient temperature was near or below freezing (32°F) when the DTCs were stored. NOTE: If any VTC DTCs other than P34A5 and/or P34A9 are also stored (example: P0011, P0021), those DTCs should be diagnosed and resolved first. ACTION Replace the electric intake valve timing control module (see Figure 1 on Page 2). -Electric intake valve timing control module is listed in the Parts Information of this bulletin. -Refer to the Electronic Service Manual (ESM), section ENGINE > ENGINE CONTROL SYSTEM, for replacement information. -Make sure to perform Electric IVT Control Actuator Position Learning after replacement of the module.

NHTSA manufacturer communications ↗

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.