FCA

68070702

2015-07-17 · NHTSA 10149733

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

O2 Sensor If your dealership is located within 1-2 hours of Metro Detroit, please contact Nadeem Akhtar at cell (734) 417-7332 before replacing this part, as engineering would like to evaluate vehicles with this issue.~ If no response is received within 15 minutes, then continue with repair.~ In all other cases, before replacing this part due to a P0141 fault code, please perform the normal diagnostic routine for this Diagnostic Trouble Code.~ If there is no trouble found, and the fault is stored, DO NOT replace the O2 Sensor, instead, perform the following procedure:~ 1. Clear the P0141 fault.~ 2. Soak the car for over 6 hours.~ 3. Turn the key to the ?on? position for 3 seconds (Do NOT crank the engine).~ 4. Turn the key directly to ?crank?.~ 5. Test drive the vehicle for two separate 6-minute drive cycles with a ?key-off? in between drive cycles.

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.