NISSAN

NTB19-118

2019-12-13 · NHTSA 10170014

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

ALTIMA, KICKS AND VERSA SEDAN; MIL ON WITH DTC B26FE IF YOU CONFIRM ï‚· A “Key System Error” message is displayed on the combination meter, And ï‚· DTC B26FE (IPDM - KEY SYSTEM ERROR) is stored in the BCM. ACTION 1. Disconnect the main power harness connector from the IPDM (E16 for Altima and E42 for Kicks and Versa Sedan). ï‚· - See Figure 1, Figure 2 and Figure 3 on the next page for IPDM main power harness connector locations. 2. Wait at least 20 seconds. 3. Reconnect the main power harness connector to the IPDM. 4. Confirm that the DTC is now past, and then erase the DTC. If the DTC will not erase, refer to the Electronic Service Manual for additional diagnostic information.

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.