FORD

SSM 50188

2021-10-11 · NHTSA 10202624

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Some 2021 Bronco Sport vehicles may exhibit DTC C009C present in the all-wheel drive (AWD) module with any of the following messages displayed in the IPC: Service Advance Trac, Hill Start Assist Not Available, Pre-Collision Assist Not Available, 4WD Malfunction, and/or Reduced Power. This may be due to connector C413 not fully seated or loose connector pins. Repair or replace connector as required. Refer to wiring diagram cell 005. Review this condition before replacing the rear drive unit (RDU). If no C413 connector issues are found, continue with Workshop Manual (WSM) diagnosis routine in Section 307-07A.

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.