FORD

SSM 50276

2021-11-10 · NHTSA 10203890

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Some 2021 Mustang Mach-E/F-150 vehicles may exhibit a Reverse Brake Assist Unavailable message displayed in the instrument panel cluster (IPC) with missing active guide lines in the reverse camera display. Diagnostic trouble code (DTC) U0415:86 may also be present in the IPMA. This may be due to a network interruption during module programming and/or when a module was disconnected which can cause the steering center find to be reset and various features to become disabled. The steering center find can be relearned by driving the vehicle for approximately 5 minutes, above 18 mph (30 km/h) and with no steering wheel input for a few seconds. When steering center is found, the Reverse Brake Assist Unavailable message should clear. If the active guide lines are missing, perform the IPMA camera alignment using Ford Diagnosis and Repair System (FDRS).

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.