CHRYSLER

0804317

2017-08-05 · NHTSA 10224726

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Flash: Battery Pack Control Module (BPCM) Diagnostic and System Improvements This bulletin involves reprogramming the BPCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0AA1-00 - Hybrid Battery Positive Contactor Circuit Stuck Closed (After the vehicle is turned off, it may fail to restart). P0AA6-00 - Hybrid Battery Voltage System Isolation Fault. P1E1B-00 - Hybrid-Ev Battery Side Voltage System Isolation.Under a vehicle side isolation failure which generates P0AA6, the BPCM may falsely set P1E1B (HV battery isolation failure) on key off which results in a no start condition. U11C5-00 - BPCM Lost Communication With On Board Charging Module. P1A9B-00 - Hybrid - EV Battery Temperature Sensor 1 Out Of Range High. P1AA7-00 - Hybrid - EV Battery Temperature Sensor 4 Out Of Range High.

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.