FORD

SSM 51894

2023-08-28 · NHTSA 10241619

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Some 2021 F-150 vehicles may exhibit a lack of steering assist upon start-up along with a Steering Assist Fault message in the instrument panel cluster (IPC) with DTC U3001:68 and/or U3001:89 along with U3000:96 in the power steering control module (PSCM). This may be due to low battery voltage when attempting to start the vehicle. Power steering assist will be restored when battery voltage is at or above 12 volts and the DTCs are cleared. Replacement of the PSCM is not necessary. Flash the PSCM to the latest software level and clear the DTCs afterwards. Once cleared, cycle the ignition to verify normal system operation. If the DTCs return, refer to Workshop Manual Section 211-02 for normal diagnostics. For claiming, use causal part 3504 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.