JEEP

18-013-24 REV. C

2024-06-20 · NHTSA 11002070

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0032 - O2 Sensor 1/1 Heater Circuit High. ● P2097 - Downstream Fuel Trim System 1 Rich. ● P0171 - Fuel System 1/1 Lean. ● P0300 - Multiple Cylinder Misfire. ● P06E4 - Control Module Wake-Up Circuit Performance. ● B12B4 - Charge Status Indicator Module Internal. ● P061B - Internal Control Module Torque Calculation Performance. ● P0810 - Clutch Position Control Error. ● P2885 - Engine Disconnect Clutch Engagement Fault. Customers may also experience one or more of the following: ● Vehicle misfires. ● Low speed engine stall at idle. ● Difficulty shifting out of 4LO. ● Idle creep while in 4LO with transmission in neutral. This bulletin involves reprogramming the Transmission Control Module (TCM), Powertrain Control (PCM) and the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM) **or reprogramming the TCM and PCM only** with the latest available software."

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.