RAM

9100395

2024-07-30 · NHTSA 11005338

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Shifter Binding Or "Service Shifter" Message On The Cluster. Scan the vehicle for DTCs. If one or more of the following are set, proceed to Repair. - U11E3 - TCM Lost Communication with ESM on D-PT CAN - U0103 - Loss Communication with Electric Gear Shift Module - U1267 - No Valid Data Available from ESM on CAN-C or CAN D-PT Perform the following checks. 1. Check the wiring connectors 2. Check that the connections are the battery are properly seated. 3. Disconnect and re connect the shifter 4. If the DTC is still present, erase it using the scan tool 5. If the issue is still present, do a hard reset through scan tool 6. If DTCs are still present, replace the part

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.