LEXUS
L-TT-0336-24 Rev1
2024-11-06 · NHTSA 11011637
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Manufacturer summary
Original wording in English
After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087 - Lost Communication with ECM/PCM "A" Missing Message. Upon investigation, it is found that the engine ECU has been damage and needs to be replaced. In several cases, the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or mounting bracket. To prevent this condition from occurring, it is recommended that the jumper cables be attached as described in the owner’s manual.
NHTSA manufacturer communications ↗Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.