Skip to content

RAM

18-012-26 REV.A

2026-02-05 · NHTSA 11028763

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer summary

Original wording in English

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P20EE-00 - SCR Nox Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P203F-00 - Reductant Level Too Low. ● P2698-00 - Exhaust Aftertreatment Fuel Injector "A" Performance. ● P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. ● P06BA-00 - Cylinder 2 Glow Plug Circuit Performance. ● P06BB-00 - Cylinder 3 Glow Plug Circuit Performance. ● P06BC-00 - Cylinder 4 Glow Plug Circuit Performance. ● P06BD-00 - Cylinder 5 Glow Plug Circuit Performance. ● P06BE-00 - Cylinder 6 Glow Plug Circuit Performance. Customers may also comment on one or more of the following: ● Diesel Exhaust Fluid (DEF) level gauge inaccuracy. ● Poor cold start performance. ● Unable to initiate manual Diesel Particulate Filter (DPF) regen through Electronic Vehicle Information Center (EVIC). ● While using the remote Power Take-Off (PTO) feature, the PTO may not engage or resume operation properly, after disengaging: 1. Engine is running with PTO engaged. 2. Operator is using the equipment, for example a bucket attachment. 3. Operator gets in position, then uses remote start/stop button to turn truck off while they perform a task. 4. The task is completed, then operator is ready to move the bucket so they use remote start/stop to start the engine. 5. The engine starts but PTO does not automatically re-engage so the equipment doesn’t operate. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.

NHTSA manufacturer communications ↗

Repeated filings are grouped only when make, bulletin number, publication date and complete summary agree. Original record numbers are retained. Older publications remain available, and an explicit later version is shown when established. Pre-1994 vehicle associations are separated from default results; an unspecified year does not mean all model years apply.