B273C · Manufacturer communications

DODGE · 2026-01-23

Flash: Occupant Restraint Controller (ORC) Software Update Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● U12B3-00 - Lost Communication With Occupant Restraint Controller (ORC). ● U0151-00 - Lost Communication With Occupant Restraint Controller (ORC). ● B273C-00 - Digital Crash Input. Customers may experience the following: ● The vehicle will not be able to shift out of Park and is unable to be driven. This bulletin involves updating the ORC with the latest available software.

DODGE · 2026-01-23

Flash: Occupant Restraint Controller (ORC) Software Update Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● U12B3-00 - Lost Communication With Occupant Restraint Controller (ORC). ● U0151-00 - Lost Communication With Occupant Restraint Controller (ORC). ● B273C-00 - Digital Crash Input. Customers may experience the following: ● The vehicle will not be able to shift out of Park and is unable to be driven. This bulletin involves updating the ORC with the latest available software.

JEEP · 2025-09-27

Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The "Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes.

JEEP · 2025-09-03

Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The "Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes This bulletin involves installing a ferrite bead to the high voltage battery body harness.

JEEP · 2025-06-14

"Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0C19 - Drive Motor A Torque Delivered Performance. ● P1B03 - Resolver Signal / MCPA Rationality. ● B273C - Digital Crash Input. Customers may experience the following: ● Intermittent wrench (service HV) icon condition. This bulletin involves reprogramming the HCP/AHCP, also known as Power Inverter Module (PIM), with the latest available software.**"

JEEP · 2025-05-22

"Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The ""Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes. This bulletin involves installing a ferrite bead to the high voltage battery body harness."

JEEP · 2025-04-12

"Service Hybrid Electric Vehicle System Warning Message Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● B273C-00 - Digital Crash Input. NOTE: Technicians may find the DTC is stored or pending in the Hybrid Control Processor (HCP). Customers may experience one or more of the following: ● The ""Service Hybrid Electric Vehicle System Warning” message and Light are displayed in the Instrument Panel Cluster (IPC) Fig. 1. NOTE: This message may be displayed for a few seconds and then disappear. ● The vehicle may no longer enter Electric or Hybrid drive modes This bulletin involves installing a ferrite bead to the high voltage battery body harness."

JEEP · 2025-04-12

"High Voltage Wiring Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B273C-00 - Digital Crash Input. ● U0287-00 - Lost Communication With Transmission Fluid Pump Module 1. Customers may also experience one or more of the following: ● Vehicle shakes during a cold start. ● Noise is heard from the underbody near the P2 motor. This bulletin involves repairing the High Voltage (HV) cable harness to the Power Inverter Module (PIM)"

JEEP · 2025-03-22

"High Voltage Wiring Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B273C-00 - Digital Crash Input. ● U0287-00 - Lost Communication With Transmission Fluid Pump Module 1. Customers may also experience one or more of the following: ● Vehicle shakes during a cold start. ● Noise is heard from the underbody near the P2 motor. REPAIR SUMMARY: This bulletin involves repairing the High Voltage (HV) cable harness to the Power Inverter Module (PIM)"

JEEP · 2025-02-13

Service Hybrid Electric Vehicle System Message Displayed In The IPC. Vehicle Shakes During A Cold Start And Noise Is Heard Near The P2 Motor. DTC’s U0287-00 And B273C-00

JEEP · 2025-01-09

"Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0C19 - Drive Motor A Torque Delivered Performance. ● P1B03 - Resolver Signal / MCPA Rationality. ● B273C - Digital Crash Input. Customers may experience the following: ● Intermittent wrench (service HV) icon condition. "

JEEP · 2024-11-10

"Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0C19 - Drive Motor A Torque Delivered Performance. ● P1B03 - Resolver Signal / MCPA Rationality. ● B273C - Digital Crash Input. Customers may experience the following: ● Intermittent wrench (service HV) icon condition. This bulletin involves reprogramming the HCP/AHCP, also known as Power Inverter Module (PIM), with the latest available software."

JEEP · 2024-11-01

"Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0C19 - Drive Motor A Torque Delivered Performance. ● P1B03 - Resolver Signal / MCPA Rationality. ● B273C - Digital Crash Input. Customers may experience the following: ● Intermittent Wrench (service HV) Condition. This bulletin involves reprogramming the HCP/AHCP, also known as Power Inverter Module (PIM), with the latest available software."

JEEP · 2024-09-16

P2 TO PIM harness For fault B273C-00 - Before replacing P2 to PIM HV Harness - REFER TO SOL S2408000063

JEEP · 2024-09-16

P1 TO PIM harness For fault B273C-00 Before replacing harness P1 to PIM HV Harness - review SOL S2408000063

JEEP · 2022-09-07

Service Hybrid Electric Vehicle System Message Displayed In The IPC. Vehicle Shakes During A Cold Start And Noise Is Heard Near The P2 Motor. DTC?s U0287-00 And B273C-00