Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer communications
5Original wording in English
FORD
Some 2022 Bronco Sport vehicles built on 04-Aug-2022 and through 05-Aug-2022 may exhibit an ABS warning indicator with diagnostic trouble code (DTC) C0030:07 stored in the ABS module. The vehicle may also exhibit a squeal noise from the left front wheel area. This may be due to a condition where the wheel bearing and snap ring a…
VOLVO
If a grinding noise occur from the front wheel hub and/or BCM-C003307 or BCM-C003007 DTCs are set, follow the advice under ?Service?. Service: Check if the wheel hub is displaced in the steering knuckle, refer to picture ?TJ 25329-1.jpg?. If found replace the wheel hub according to VIDA.
RAM
2016 DS ABS Module Before replacing the ABS module for a wheel speed sensor fault(s) listed below, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue with normal repair procedure.~ ~ Possible wheel speed sensor faults: ~ C0030-02 Left Front Tone Wheel-General Sign…
RAM
Before replacing the ABS module for a wheel speed sensor fault(s) listed below, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue with normal repair procedure.~ Possible wheel speed sensor faults: ~ C0030-02 Left Front Tone Wheel-General Signal Failure~ C0031-1D …
Check vehicle applicability
52A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.