C0196 · Manufacturer communications

CHEVROLET, GMC · 2018-11-19

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp, service Antilock Braking System, Service Stabilitrak, Service All Wheel Drive, Service Suspension Control, or Hard Steering. Technician may find the following Diagnostic Trouble Codes stored C0196, C0186, C0287, C0710, C0045, C0050, C0800, U0077, U0074, U0125, U0126, U0100, U0101, U0121, U0415, U0432, U0121, and or U0140. Technician should inspect X411 connector for damage or corrosion. Technician will replace any terminals with damage or corrosion.

KARMA · 2017-09-13

DTC C0196 active code after transport present, The vehicle wakes up in transport and it senses movement with no wheel speed. this is a procedure to clear the code and reset behavior.

CADILLAC, CHEVROLET, GMC · 2015-10-02

This technical bulletin provides repair information to correct a customer concern of a Service Stabilitrak message displayed on the Driver Information Center (DIC). During diagnosis, a technician may find DTC C0196-5A set in the Electronic Brake Control Module (EBCM).

CHEVROLET, GMC · 2015-09-21

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp, service Antilock Braking System, Service Stabilitrak, Service All Wheel Drive, Service Suspension Control, or Hard Steering. Technician may find the following Diagnostic Trouble Codes stored C0196, C0186, C0287, C0710, C0045, C0050, C0800, U0077, U0074, U0125, U0126, U0100, U0101, U0121, U0415, U0432, U0121, and or U0140. Technician should inspect X411 connector for damage or corrosion. Technician will replace any terminals with damage or corrosion.

BUICK, CHEVROLET · 2015-08-27

This preliminary informational bulletin provides diagnostic tips to correct a customer concern of Airbag Readiness Light on, and technician may find DTC B101D SYM 00 and C0186, C0196 and/or C0287 set.

BUICK, CHEVROLET · 2015-08-10

This preliminary informational bulletin provides diagnostic tips to correct a customer concern of Airbag Readiness Light on, and technician may find DTC B101D SYM 00 and C0186, C0196 and/or C0287 set.

CHEVROLET, GMC · 2015-06-01

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp, service Antilock Braking System, Service Stabilitrak, Service All Wheel Drive, Service Suspension Control, or Hard Steering. Technician may find the following Diagnostic Trouble Codes stored C0196, C0186, C0287, C0710, C0045, C0050, C0800, U0077, U0074, U0125, U0126, U0100, U0101, U0121, U0415, U0432, U0121, and or U0140. Technician should inspect X411 connector for damage or corrosion. Technician will replace any terminals with damage or corrosion.

BUICK, CADILLAC, CHEVROLET, GMC · 2015-05-14

This Preliminary Information communication advises the technician to insure that global diagnostic service 2 diagnostic packages are up to date prior to learning the steering angle sensor for a diagnostic trouble code C710 symptom code 71 set in the electronic brake control module or the power steering control module. When rechecking for diagnostic trouble codes a U0074 U0077, U0180D, U01293, U0126, U0125, C0186, C0196, or C0287 are set and will not clear diagnose the Chassis bus. If no fault is found in the chassis bus check for an multiple diagnostic interface to data link connector issue. Technician is to try a different multiple diagnostic interface cable and attempt the steering angle sensor learn again following service information instruction then try to clear the codes again.

CADILLAC, CHEVROLET · 2015-02-25

This Preliminary Information communication provides information to the technician some vehicles may have a Service Stabilitrak message and a red brake lamp illuminated on the Instrument Panel Cluster. Technician may find a Diagnostic Trouble Code C0196 in the Electronic Brake Control Module. This concern may be preset after the vehicle was flat towed or just came off a car carrier. Technician will need to perform a Multi Axis sensor learn and a Diagnostic Trouble Code clear in the Electronic Brake Control Module. Then shut ignition off, open and close driver door and let vehicle sit for 3 minutes. After the vehicle has slept for 3 minutes start the vehicle and let it run in park for 10 seconds. Now the vehicle will need to be driven for 30 seconds over 20 miles per hour. If code is…

CADILLAC · 2014-05-07

This Preliminary Information communication provides information to the technician about vehicle that may have the following Diagnostic Trouble Codes U0401, U0140, P15F6, P1E00, U0100, P0562, P1553, P0AC4, C0110, C0898, P1EFC, P257F, P150D, P150E, C0899, U1860, U0293, C0196, P069E, U2608, U0101, U186B, P1ADE, P1AE0, P1E19, U0073, P1EDD, U0417, U184D, U1858, and C12E0 set as Passed /Failed. Technician will need to contact General Motors Technical Assistance Center for further assistance.

BUICK, CADILLAC, CHEVROLET, GMC · 2014-02-10

This Preliminary Information communication advises the technician to insure that global diagnostic service 2 diagnostic packages are up to date prior to learning the steering angle sensor for a diagnostic trouble code C710 symptom code 71 set in the electronic brake control module or the power steering control module. When rechecking for diagnostic trouble codes a U0074 U0077, U0180D, U01293, U0126, U0125, C0186, C0196, or C0287 are set and will not clear diagnose the Chassis bus. If no fault is found in the chassis bus check for an multiple diagnostic interface to data link connector issue. Technician is to try a different multiple diagnostic interface cable and attempt the steering angle sensor learn again following service information instruction then try to clear the codes again.

CADILLAC, CHEVROLET · 2014-02-06

This Preliminary Information communication provides information to the technician some vehicles may have a Service Stabilitrak message and a red brake lamp illuminated on the Instrument Panel Cluster. Technician may find a Diagnostic Trouble Code C0196 in the Electronic Brake Control Module. This concern may be preset after the vehicle was flat towed or just came off a car carrier. Technician will need to perform a Multi Axis sensor learn and a Diagnostic Trouble Code clear in the Electronic Brake Control Module. Then shut ignition off, open and close driver door and let vehicle sit for 3 minutes. After the vehicle has slept for 3 minutes start the vehicle and let it run in park for 10 seconds. Now the vehicle will need to be driven for 30 seconds over 20 miles per hour. If code is…

CADILLAC, CHEVROLET · 2014-02-01

Service Stabilitrak DTC C0196 After Vehicle Has Been Transported.

BUICK, CADILLAC, CHEVROLET, GMC · 2012-10-11

This Preliminary Information communication advises the technician to insure that global diagnostic service 2 diagnostic packages are up to date prior to learning the steering angle sensor for a diagnostic trouble code C710 symptom code 71 set in the electronic brake control module or the power steering control module. When rechecking for diagnostic trouble codes a U0074 U0077, U0180D, U01293, U0126, U0125, C0186, C0196, or C0287 are set and will not clear diagnose the Chassis bus. If no fault is found in the chassis bus check for an multiple diagnostic interface to data link connector issue. Technician is to try a different multiple diagnostic interface cable and attempt the steering angle sensor learn again following service information instruction then try to clear the codes again.

CHEVROLET, PONTIAC, SATURN · 2008-11-01

GENERAL MOTORS: ABS AND STABILITRAK LIGHTS ON DTC(S) U0121, C0550, C0186, C0196, C0710, C0252. THIS CONCERN CAN BE CAUSED BY WIRE HARNESS GOING TO EBCM, CHAFFING ON TRANSMISSION MOUNT OR METAL BRACKET. *PE

BUICK, CHEVROLET, GMC, SAAB · 2006-10-12

UNABLE TO LOCATE CONNECTOR C111 OR DTC C0186, C0196. ABS CONNECTOR LAMP. *KB

CADILLAC, CHEVROLET, GMC · 2006-02-01

SERVICE STABILITY MESSAGE ON, DIAGNOSTIC TROUBLE CODE (DTC) C0131, C0196, C0290 AND/OR C0292 SET. *TT

BUICK, CADILLAC ·

SERVICE STABILITRAK MESSAGE DTC C0196, C0292, C0710. *KB

CADILLAC, CHEVROLET, GMC ·

SERVICE STABILITY MESSAGE DISPLAYED IN THE DIC. DIAGNOSTIC TROUBLE CODES C0290, C0292, C0131, OR C0196 SET IN THE EBCM. *TT