Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer communications
9Original wording in English
CADILLAC, CHEVROLET, GMC
This preliminary informational bulletin provides a procedure to apply dielectric grease and a piece of adhesive shim stock to the steering angle sensor connector to correct a condition of service stabilitak message displayed in DIC and DTC C0455 or C0710
CADILLAC, CHEVROLET, GMC
Service Stabilitrak Message With DTC C0455 and/or C0710 SYM5A After A Sequential Programming
CADILLAC, CHEVROLET, GMC
This Preliminary Information communication provides information to the technician about vehicles that have an Antilock Braking System lamp followed by a Service Stability message in the Drivers Information Center. Technician my find Diagnostic Trouble Code C0710 set in the Electronic Brake Control Module. Technician may or may n…
CHEVROLET, GMC
DIAGNOSTIC TROUBLE CODE C0455, SERVICE REAR WHEEL STEERING, SYSTEM JUMPS FROM 4-WHEEL STEER TO 2-WHEEL STEER. *TT
Check vehicle applicability
159A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Cadillac | ESCALADE ↗ | 2014 |
| Cadillac | ESCALADE ↗ | 2013 |
| Cadillac | ESCALADE ↗ | 2012 |
| Cadillac | ESCALADE ↗ | 2011 |
| Cadillac | ESCALADE ↗ | 2010 |
| Cadillac | ESCALADE ↗ | 2009 |
| Cadillac | ESCALADE ↗ | 2008 |
| Cadillac | ESCALADE ↗ | 2007 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.