Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
C0460pressure sensor failure
C0460PRESSURE SENSOR FAILURE
Manufacturer communications
11Original wording in English
CHEVROLET, PONTIAC, SATURN
This engineering informational bulletin is requesting information on electric power steering loss of assist with DTCs C0545 and/or C0460 set.
CADILLAC, GMC
This technical bulletin provides a procedure to reprogram the power steering control module to correct a condition of Reduced Steering Assist Message with DTC C0460 Sym 5A due to a software abnormality.
CADILLAC, GMC
Reduced Steering Assist Message with DTC C0460 Sym 5A Condition Some customers may comment on a Reduced Steering Assist message on the DIC with no loss of steering assist. During diagnosis a technician may find DTC C0460 Sym 5A. Cause The condition is due to Steering Angle Sensor trim error. Note: The calibration allows for an e…
CHEVROLET
This technical bulletin provides a procedure to reset the steering angle sensor to correct a customer concern that the traction control system (stabilitrak) light is on and DTC C0460 set caused by to a brief low voltage incident.
Check vehicle applicability
32A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.