Skip to content

Chassis

C1115

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

View all ↗

Manufacturer communications

11

Original wording in English

View all ↗

AUDI

Side assist inoperative or warning about sensor vision. Audi side assist (lane change assist) does not work. A warning about sensor vision appears in the driver information system. DTCs B200000, C111504, C1114F3, or C1115F5 may be stored in the lane change assistance control module. Defective internal control unit component. Pro…

PIT5449 ↗

CHEVROLET, GMC

This Preliminary Information communication provides information to the technician for a service trailer brake message on in the vehicle. The technician will find diagnostic trouble codes C1115, C1116, C1117, or C1118. In most cases the chassis control module is not the cause of the trouble codes. The technician should inspect th…

AUDI

Supersedes Technical Service Bulletin Group 96 number 13-51 dated February 15, 2013. Audi side assist deactivates immediately after the engine is started. DTC C1115F2 (Lane change assistance control module 2 Function limitation due to insufficient voltage) is logged in the lane change assistance control module. The software of t…

AUDI

Lane Change Assistant "Sensors Blocked" warning in DIS (DTC C1114F3 and C1115F5)

Check vehicle applicability

60

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
AudiA3 CABRIOLET ↗2016
AudiA4 ↗2014
AudiA4 ↗2013
AudiA4 ALLROAD ↗2016
AudiA4 ALLROAD ↗2013
AudiA5 ↗2016
AudiA5 ↗2014
AudiA5 ↗2013

Code meaning and manufacturer information

Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.

ABS Power Relay Output Short Circuit To Battery

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.