A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
C1126 ← What does this code mean?4 Results
HYUNDAI · 2024-12-13
Certain Santa Fe Hybrid (MX5A HEV) vehicles’ Body Domain Controller (BDC) software logic may disable the Tire Pressure Monitoring System (TPMS) system that leads to a low-voltage logic error with active DTC C112600. Follow the instructions in this bulletin to update the BDC software to correct the TPMS system and to enhance Smart Key recognition.
HYUNDAI · 2024-11-15
Certain Santa Fe (MX5A) vehicles’ Body Domain Controller (BDC) software logic may disable the Tire Pressure Monitoring System (TPMS) system that leads to a low-voltage logic error with active DTC C112600. Follow the instructions in this bulletin to update the BDC software to correct the TPMS system and to enhance Smart Key recognition.
KIA · 2024-07-11
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: BDC-BCM LOGIC IMPROVEMENT FOR DTC C1126 (SA579) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to improve the Body Domain Controller (BDC) – Body Control Module (BCM) operation logic on certain 2024MY EV9 (MV) vehicles produced from September 25, 2023 through February 21, 2024. The BDC Motor Control Unit (MCU) may incorrectly read the 12V auxiliary battery voltage as 0V. If this condition occurs, the tire pressure monitoring system (TPMS) light will blink for approximately one (1) minute and then remain illuminated, with the DTC C1126. This software upgrade may also be available via Over The Air (OTA)…
KIA · 2024-06-24
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: BDC-BCM LOGIC IMPROVEMENT FOR DTC C1126 (SA579) - This bulletin provides information to improve the Body Domain Controller (BDC) – Body Control Module (BCM) operation logic on certain 2024MY EV9 (MV) vehicles produced from September 25, 2023 through February 21, 2024. The BDC Motor Control Unit (MCU) may incorrectly read the 12V auxiliary battery voltage as 0V. If this condition occurs, the tire pressure monitoring system (TPMS) light will blink for approximately one (1) minute and then remain illuminated, with the DTC C1126.