Skip to content

Chassis

C1593

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

View all ↗

Manufacturer communications

23

Original wording in English

View all ↗

JEEP

Diagnostic Trouble Code DTC(s) C1593-00, C2217-00, U0131-00. and Service Electric Power Steering Messages.

S2523000065 ↗

JEEP

Diagnostic Trouble Code DTC(s) C1593-00, C2217-00, U0131-00. and Service Electric Power Steering Messages.

08-185-25 ↗

JEEP

"Loss Of Power Steering Assist Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs) as active: ● C1593-00 - Steering Torque Sensor Circuit. ● C0051-64 - Steering Angle Sensor (EPS) - Signal Plausibility Failure. Cus…

9100596 ↗

JEEP

"Gear Assy - Steering Rack 1) If below DTCs are observed, please refer to 08-095-25 REV. B (For MY24) and 08-094-25 REV. A (For MY25) U0420-00 - Invalid Data Received from Power Steering Control Module. (Set by CADM2) C2217-00 - Electric Power Steering Module Internal. C221F-00 - ECU Not Initialized. C1592-00 - Electronic Po…

Check vehicle applicability

27

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.