Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer communications
3Original wording in English
NISSAN
2015 MURANO; DTC C1769 STORED AFTER BCM REPLACEMENT This bulletin is no longer applicable. Discard previous versions of NTB15-012.
NISSAN
SERVICE INFORMATION After replacing a BCM in an Applied Vehicle the TPMS must be configured with the correct "DATA PART NO." to complete the repair or a DTC C1769 (CONFIGURATION SETTING) may be set. Use C-III plus through Manual Configuration to do this. The configuration setting is based on the vehicle?s tire pressure (see Tabl…
LINCOLN
SERVICE PARK BRAKE MESSAGE IN THE MESSAGE CENTER AND THE AMBER ELECTRONIC PARK BRAKE (EPB) SWITCH INDICATOR MAY BE ILLUMINATED DIAGNOSTIC TROUBLE CODES C1094, C1408, C1409, C1769, C1782, C1783, C1987, C1988 OR C1989. *TT
Check vehicle applicability
2A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.