Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
C1A67:78RADAR SENSOR AXIS IS DEVIATED
C1A67:04front radar sensor internal malfunction
C1A67:78Radar sensor axis is deviated
Manufacturer communications
17Original wording in English
MAZDA
Some vehicles equipped with Smart Brake Support (SBS) may exhibit a front radar system malfunction message in the instrument cluster with DTC C1A67:04 (front radar sensor internal malfunction) stored in memory. This may be caused by water penetrating into the front radar sensor through the breather hole when exposed to a great a…
MAZDA
Some vehicles equipped with Smart Brake Support (SBS) may exhibit a front radar system malfunction message in the instrument cluster with DTC C1A67:04 (front radar sensor internal malfunction) stored in memory. This may be caused by water penetrating into the front radar sensor through the breather hole and damaging the radar se…
LAND ROVER
Adaptive speed control not available, intelligent emergency braking not available, forward alert not available over 80km/h (50mph) is displayed on the Instrument Cluster (IC). Diagnostic Trouble Code (DTC) C1A67-78 and/or C1A67-54 are set in the Adaptive Speed Control Module (ASCM).
LAND ROVER
Adaptive speed control not available, intelligent emergency braking not available, forward alert not available over 80km/h (50mph) is displayed on the Instrument Cluster (IC). Diagnostic Trouble Code (DTC) C1A67-78 and/or C1A67-54 are set in the Adaptive Speed Control Module (ASCM).
Check vehicle applicability
63A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.