C1B00 · Manufacturer communications

FORD · 2023-12-04

Some 2023 F-Super Duty vehicles may exhibit pre-collision assist, hill start assist, Advance Trac, and/or blind spot/cross traffic fault messages with diagnostic trouble code (DTC) C1B00:62 stored in the power steering control module (PSCM). This may be due to the software in the PSCM. To correct the condition, reprogram the PSCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 3G568 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2021-08-31

Some 2020-2021 F-Super Duty vehicles equipped with an electronic steering actuator and built on or before 12-Apri-2021 may exhibit various steering fault messages with diagnostic trouble code (DTC) C1B00 stored in the power steering control module (PSCM). To correct the condition, reprogram the PSCM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 3G568 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2021-08-10

Some 2020-2021 F-Super Duty vehicles equipped with an electronic steering actuator and built on or after 12-Apri-2021 may exhibit various steering fault messages with diagnostic trouble code (DTC) C1B00 stored in the power steering control module (PSCM). To correct the condition, reprogram the PSCM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 3G568 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD, LINCOLN · 2021-08-02

Some 2020-2021 Escapes/Corsair vehicles may exhibit an illuminated stability-traction control indicator lamp with diagnostic trouble code (DTC) C1B00:62 in the power steering control module (PSCM) and DTC C0051:67 in the anti-lock brake system (ABS) module. This may be due to a misalignment between the steering column shaft and the steering wheel. To resolve the condition, follow the Service Procedure to properly align the steering column shaft and steering wheel.

FORD, LINCOLN · 2021-02-04

Some 2020 Escape, 2020-2021 Corsair, 2021 Bronco Sport and 2021 Mustang Mach-E vehicles may exhibit DTC C1B00:62 present in the PSCM with any of the following messages displayed: Service Advance Trac, Hill Start Assist Not Available, Lane Keeping Sys. Malfunction Service Required, or Pre-Collision Assist Not Available. This may be due to a disconnected or discharged battery, recent PSCM or anti-lock brake system (ABS) module reprogram or configuration, or loss of ABS communication to the PSCM. The Workshop Manual pinpoint test is in the process of being updated and replacement of the electronic power assist steering (EPAS) column is not necessary. To clear the DTC, drive the vehicle straight for 30 seconds at speeds over 50 km/h (30 mph). Cycle the ignition on/off once complete. For…

FORD, LINCOLN · 2020-12-02

Some 2020 Escape and 2020-2021 Corsair vehicles may exhibit DTC C1B00:62 present in the PSCM with any of the following messages displayed: Service Advance Trac, Hill Start Assist Not Available, Lane Keeping Sys. Malfunction Service Required, or Pre-Collision Assist Not Available. This may be due to a disconnected or discharged battery, recent PSCM or anti-lock brake system (ABS) module reprogram or configuration, or loss of ABS communication to the PSCM. The Workshop Manual pinpoint test is in the process of being updated and replacement of the electronic power assist steering (EPAS) column is not necessary. To clear the DTC, drive the vehicle straight for 30 seconds at speeds over 50 km/h (30 mph). Cycle the ignition on/off once complete. For claiming use causal part 3C529.

FORD, LINCOLN · 2016-11-03

SOME 2016 EDGE/MKX VEHICLES EQUIPPED WITH ADAPTIVE/ACTIVE STEERING MAY EXHIBIT A CHECK ADAPTIVE/ACTIVE STEERING MESSAGE ILLUMINATED IN THE INSTRUMENT PANEL CLUSTER (IPC) MESSAGE CENTER WITH DIAGNOSTIC TROUBLE CODE (DTC) C1B00 STORED IN THE STEERING EFFORT CONTROL MODULE (SECM). FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.