Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P008BLOW PRESSURE FUEL SYSTEM, PRESSURE TOO HIGH
P008BLow Fuel Pressure Too High
P008BLOW FUEL PRESSURE TOO HIGH
Manufacturer communications
10Original wording in English
FORD, LINCOLN
Some 2013-2015 Fusion/MKZ/Escape/MKC with a 1.6L GTDI, 1.5L GTDI, or 2.0L GTDI may exhibit a lack of power, loss of power, or stall when placed in gear with DTCs P00C6, P0087, P008A, P008B, P018C, or P018D. If normal diagnosis leads to a biased or failed Fuel Low Pressure (FLP) sensor, the sensor is available without the need to…
JAGUAR
The engine MIL (Malfunction Indicator Lamp) may be illuminated on the Instrument Cluster (IC) with DTC (Diagnostic Trouble Code) P008B stored in the Powertrain Control Module (PCM).
JAGUAR
SITUATION: The engine Malfunction Indicator Lamp (MIL) may be illuminated on the Instrument Cluster (IC) with Diagnostic Trouble Code (DTC) P008B is stored in the Powertrain Control Module (PCM).
LAND ROVER
"ISSUE: SYMPTOM: - ENGINE MIL ILLUMINATED ON IPC. ROUGH IDLE, HESITATION AND/OR LOSS OF POWER. ONE OR MORE OF THE FOLLOWING DTCS MAY BE SET IN THE PCM: • P008A, • P008B, • P2542. CAUSE: SUB-OPTIMAL PCM SOFTWARE CALIBRATION"
Check vehicle applicability
83A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.