Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0206Fuel Injector X Circuit/Open
P0206Fuel Injector X Circuit/Open Fault Codes
P0206Fuel Injector X Circuit Open Fault Codes
Manufacturer communications
58Original wording in English
FORD
Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P0301-P0306, P0201-P0206 and/or various other powertrain DTCs stored in the PCM. This may be due to the engine harness contacting the hose crimp end or spring clamp tangs on the exhaust heat exchanger he…
CADILLAC, CHEVROLET, GMC
This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated with DTC P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 Set.
RAM
Diesel Fuel Pump Failure and System Contamination Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0087-00 - Fuel Rail Pressure Too Low. ? P008A-00 - Low Pressure Fuel Sy…
CADILLAC, CHEVROLET, GMC
This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated with DTC P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 Set.
Check vehicle applicability
748A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Buick | ENCLAVE ↗ | 2014 |
| Buick | ENCLAVE ↗ | 2013 |
| Buick | ENCLAVE ↗ | 2012 |
| Buick | ENCLAVE ↗ | 2011 |
| Buick | ENCLAVE ↗ | 2010 |
| Buick | ENCLAVE ↗ | 2009 |
| Buick | LACROSSE ↗ | 2014 |
| Buick | LACROSSE ↗ | 2013 |
Code meaning and manufacturer information
Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.
Injector Circuit Malfunction – Cylinder 6
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.