A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
P050F ← What does this code mean?11 Results
FORD · 2025-06-14
Some of the vehicles listed in the Model statement above may exhibit an illuminated brake warning lamp while driving through high altitude areas with diagnostic trouble code (DTC) P050F stored in the anti-lock brake system module (ABS). This may be due to the ABS software level.
FORD · 2024-10-29
Some 2024 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) modul
FORD · 2024-09-27
Some 2021-2022 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) module.
FORD · 2022-11-15
Some 2021-2022 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) module. This may be accompanied by an intermittent firm brake pedal after driving for long periods at highway speeds. This may be due to improper sealing of an internal diaphragm within a brake booster vacuum line. To correct this condition, replace the vehicle's vacuum line with the latest version service part number MB3Z-2420-H or later. Refer to Workshop Manual (WSM), Section 206-09 for installation instructions. For claiming, use casual part 2420.
FORD · 2022-02-07
Some 2021-2022 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and/or brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) module and a firm brake pedal. This may be due to contamination in a brake booster vacuum line. To correct this condition, replace the vehicle's vacuum hose (MB3Z-2420-A). Refer to Workshop Manual (WSM), Section 206-09 for installation instructions. For claiming, use casual part 2420.
FORD · 2021-11-30
Some 2021 Bronco vehicles equipped with the 2.3L engine may exhibit a red brake warning lamp and/or brake system warning message in the instrument panel cluster (IPC) with a diagnostic trouble code (DTC) P050F in the anti-lock brake system (ABS) module and a firm brake pedal. This may be due to contamination in a brake booster vacuum line. To correct this condition, replace the vehicle's vacuum hose (MB3Z-2420-A). Refer to Workshop Manual (WSM), Section 206-09 for installation instructions. For claiming, use casual part 2420.
CHEVROLET, GMC · 2018-02-09
This preliminary information was created to express that engineering is investigating the issue of a service engine soon lamp on and a code P050F low vacuum code storing.
CHEVROLET, GMC · 2018-01-23
This preliminary information was created to express that engineering is investigating the issue of a service engine soon lamp on and a code P050F low vacuum code storing.
CHEVROLET · 2017-12-18
This Technical bulletin provides a fix to update the ECM if technicians find DTC P050F set or stored in history to correct a condition of Brake booster Weak vacuum.
BUICK, CHEVROLET · 2017-11-01
Service Brake Assist Message displayed on Initial Start Up with DTC P050F Set Condition Some customers may comment that on first start up they receive a "Service Brake Assist Message" displayed. During diagnosis a technician may find DTC P050F set. Cause This may be due to a calibration within the Electronic Brake Control Module (EBCM) not giving the engine enough time to build system vacuum. Correction Reprogram the EBCM with the latest calibrations
BUICK, CHEVROLET · 2017-11-01
This technical bulletin provides a procedure to reprogram the EBCM with the latest calibrations to correct a condition of Service Brake Assist Message displayed on Initial Start Up with DTC P050F Set due to a software issue.