Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0524Low oil pressure (during start up in cold ambient temps)
P0524:00Engine oil pressure too low
P0524:00ENGINE OIL PRESSURE TOO LOW THIS IS CAUSED BY A DROP IN ENGINE OIL PRESSURE DUE TO A PIECE OF FOREIGN OBJECT STUCK ON THE OIL PUMP PRESSURE RELIEF VALVE OR OCV
Manufacturer communications
76Original wording in English
MAZDA
Some vehicle may exhibit the CHECK ENGINE light on with DTC P0524 (Engine oil pressure control system: Oil pressure decrease) and no abnormal engine noise. This may be caused by a malfunction of the oil pressure control valve (located at the rear of the engine block near the oil filter) due to machining contamination inside the …
FORD, LINCOLN
Some 2016-2017 Edge/MKX, 2017 Continental/Fusion/MKZ vehicles equipped with a 2.7L or 3.0L EcoBoost engine and built on 1-Apr-2016 and through 1-Jan-2017 may exhibit white or blue smoke from the exhaust, rough idle in neutral or park at normal operating temperature or after a hot restart. The vehicle may also exhibit an illumina…
MERCEDES-BENZ
Complaint Red oil pressure warning in instrument cluster One of the below fault codes is stored in powertrain control unit N127: P052497 The oil pressure is too low. The system function is restricted. P052400 The oil pressure is too low Cause Various Remedy If low oil level warning present diagnose cause of this first. -Check en…
VOLVO
These repair instructions are intended to address the following fault: P0524-00 (Engine Oil Pressure Too Low).
Check vehicle applicability
380A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Bentley | BENTAYGA ↗ | 2024 |
| Bentley | BENTAYGA ↗ | 2023 |
| Bentley | BENTAYGA ↗ | 2022 |
| Bentley | BENTAYGA ↗ | 2021 |
| Bentley | BENTAYGA ↗ | 2020 |
| Bentley | BENTAYGA ↗ | 2018 |
| Bentley | BENTAYGA ↗ | 2017 |
| Bentley | BENTAYGA HYBRID ↗ | 2023 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.