A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
P054F ← What does this code mean?12 Results
FORD · 2023-03-14
Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0315, P054F, P054E, P2A00, P2A01, and/or P02ED stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and the transmission control module (TCM).
FORD · 2021-10-29
Some 2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 05-Oct-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P054E, P054F, P02ED, P2A00 And/Or P2A01 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
FORD · 2021-09-14
Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0315, P054F and/or P02ED stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
FORD · 2021-06-02
Some 2016 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L engine built on or before 15-Feb-2016 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P054F stored in the powertrain control module (PCM). This may be caused by the torque converter one way clutch. To correct the condition, perform the torque converter stall speed test. Refer to Workshop Manual (WSM) Section 307-01B > Special Testing Procedures > Stall Speed Test. For this specific condition, the line pressure test is not required prior to performing the stall speed test. If engine stall speed does not reach the minimum RPM range specified, replace the torque converter, torque convertor hub seal, and fluid filter. Perform the transmission fluid cooler backflushing and cleaning…
FORD · 2021-03-04
This article supersedes TSB 20-2336 to update the Title, Issue, Action, vehicles affected and production fix date. Some 2020-2021 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Feb-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300-P0308, P054F, P0603, P203B, P208B, P208C, P20EE, P2201, P24C2, P27B4, and/or P27B5 stored in the powertrain control module (PCM). The vehicle may also exhibit a forced idle condition. This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure to reprogram the PCM.
CHEVROLET, GMC · 2017-10-01
Hesitation, Stalling, Engine Speed Flare While Coasting, Unintended Acceleration Feel During a Parking Lot Maneuver, Reduced Surge in Low Speed Maneuvers, Stumble, Harsh Tip-In/Tip-Out, Park-Reverse-Drive Shift Concerns, Harsh Shifts, Erratic Shifts, Engine Vibration, Vibration, Buzz and/or Humming from Steering Wheel, Malfunction Indicator Lamp (MIL) Illuminated - DTC P0097, P054F, P24B1, P24C7, P0128, P2BAA, P2635, P11CC, P10D1, P0483, P2636, P0181, P22FE, P0263, P0266, P0269, P0272, P0275, P0278, P0281, P0284, P040C, P040D, P041C, P041D Set Cause This condition may be caused by an anomaly in the Engine Control Module (ECM) and the Transmission Control Module (TCM). Note: It is important that both the ECM and TCM are updated to the latest software. Not updating both modules may result…
CHEVROLET, GMC · 2017-06-20
This Preliminary Information communication provides information to the technician about an ECM calibration update to address DTC P054F setting.This PI updated from engineering aware of concern to valid calibration covered in TSB 17-NA-171.
CHEVROLET, GMC · 2017-02-08
This Preliminary Information communication provides information to the technician about vehicles that have a check engine light on. Technician may find Diagnostic Trouble Code P054F set. Technician will need to follow publish Service Information diagnostics first. If Service Information diagnostics do not isolate a root cause of the concern General Motors Engineering is aware of this concern and is working on a correction. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
FORD · 2016-07-01
SOME 2016 MODEL YEAR F-SUPER DUTY AND F-650/F-750 VEHICLES EQUIPPED WITH 6.7L ENGINE WITH TORQSHIFTÙ6 TRANSMISSIONS BUILT ON OR BEFORE 2/15/2016 MAY EXHIBIT A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE (DTC) P054F STORED IN MEMORY. THIS MAY BE CAUSED BY A FAILED TORQUE CONVERTER ONE WAY CLUTCH. PRIOR TO PERFORMING DIAGNOSIS FOR DTC P054F; PERFORM TORQUE CONVERTER (TC) STALL SPEED TEST (SST). REFER TO WORKSHOP MANUAL (WSM) SECTION 307-01B. FOR THIS SPECIFIC SST TEST, LINE PRESSURE TEST IS NOT REQUIRED PRIOR TO PERFORMING THE TEST. IF ENGINE STALL SPEED IS UNABLE TO REACH THE MINIMUM RPM RANGE SPECIFIED, RECOMMEND REPLACEMENT OF: TC, TC HUB SEAL, FILTER, FLUID AND FLUSH COOLER LINES. USE AVAILABLE SERVICE LABOR TIMES.
FORD · 2014-05-01
FORD: DUE TO OPERATING IN COLD AMBIENT TEMPERATURES (BELOW 20F/-7C), THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE WITH DIAGNOSTIC TROUBLE CODE (DTC) P054F. MODEL 2013-2014 F-SUPER DUTY. *PE
FORD · 2014-05-01
FORD: DUE TO POWERTRAIN CONTROL MODULE (PCM), ON SOME TRUCKS, EXHIBITS MALFUNCTION INDICATOR LAMP (MIL) AND DIAGNOSTIC TROUBLE CODE (DTC) P054F OF UNEXPECTED HIGHER QUANTITY OF FUEL AND IDLE CONTROL SYSTEM. MODEL 2011-2012 F-SUPER DUTY. *PE
FORD · 2014-01-01
FORD: MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE, IN DIESEL ENGINES, WITH DIAGNOSTIC TROUBLE CODE (DTC) P054F, WHICH OCCURS IF TRUCK OPERATING IN COLD AMBIENT TEMPERATURES BELOW 20F/-7C DEGREES. MODEL 2011-2014 F SUPER DUTY. *PE