Skip to content

Powertrain

P0741

Torque converter clutch performance or stuck off

OBD-II / DTC

Reference meaning

What does this code mean?

The lock-up clutch does not achieve the expected operating result. The wording may mention a circuit, but the failure is not necessarily electrical: hydraulic pressure loss or mechanical damage can cause the observed performance. Honda documents a cracked lock-up piston on a specifically identified Accord application.

Sources and interpretation [1]

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer example · limited applicability

Honda 23-076 identifies 2017 Accord EX-L/TRG V6 with the 6-speed automatic and requires VIN eligibility verification. It describes lock-up piston cracking and a torque-converter remedy for that application. The bulletin's warranty extension is historical policy; confirm present eligibility directly with Honda.

[1]

Before replacing a part

Confirm transmission type and capture lock-up command, slip data and related codes using the vehicle's procedure. For the Honda example, check VIN eligibility and current coverage with Honda; the 2023 bulletin does not establish that a vehicle is still under warranty today.

Scan worksheet →

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

View all ↗

Manufacturer communications

138

Original wording in English

View all ↗

HONDA

Owner Notification Letter - Under certain circumstances, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and sets DTC P0741 Torque Converter Clutch …

HONDA

Owner Notification Letter - Under certain circumstances, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and sets DTC P0741 Torque Converter Clutch …

HONDA

Owner Notification Letter - Under certain circumstances, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and sets DTC P0741 Torque Converter Clutch …

HONDA

Owner Notification Letter - Under certain circumstances, the torque converter lock-up clutch cannot provide adequate holding force due to pressure bleeding down through a crack in the lock-up piston. The reduced lock-up clutch capacity results in the transmission indicator flashing “D” and sets DTC P0741 Torque Converter Clutch …

Check vehicle applicability

626

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
AcuraRDX ↗2018
AcuraRDX ↗2017
AudiA4 ↗2013
AudiA4 ↗2012
AudiA4 ↗2011
AudiA4 ALLROAD ↗2014
AudiA4 ALLROAD ↗2013
AudiA4 AVANT ↗2012

Sources and interpretation

These explanations are editorial summaries of the linked manufacturer material. PDF page numbers count from the first file page. Original publications are in English; translations are reference aids. A cited edition is not a claim that it is the manufacturer's latest instruction.

  1. 23-076 · 2017 Accord 6AT torque converter, P0741 ↗

    American Honda Motor Co. · PDF page(s) 1, 2 · 2023-08-31

Source check date · 2026-10-27

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.