Skip to content

P07E6 · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P07E6 ← What does this code mean?

11 Results

TSB 26-2421 ↗

FORD · 2026-09-18

This bulletin updates 25-2622. Reason for update: * Update the Service Procedure to: - Remove Step related connecting a battery charger - Add Step 7 and Step 29 along with Figure 4 to include mass damper remove and install. * Update the Parts list: - Updated to include rear electric drive assembly studded bolts and nuts to secure the mass damper. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Stuck in park * "Service Vehicle Soon" message in the instrument panel cluster (IPC) * Illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P07E6:71 stored in the secondary on-board diagnostic control module C (SOBDMC) This may be due to high ground resistance of the park pawl motor.

SSM 54595 ↗

FORD, LINCOLN · 2026-02-19

Some 2025 Maverick/Corsair and 2025-2026 Escape/Bronco Sport vehicles equipped with an 8F35 transmission and built on 01-Sep-2024 and through 15-Sep-2025 may exhibit a condition where the vehicle will not shift out of Park (P) and exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P07E6, P0760, P0761, P2706, P2707 and/or P2702 stored in the powertrain control module (PCM). To correct the condition, replace the main control valve body. Refer to Workshop Manual (WSM), Section 307-01. For claiming, use causal part 7A100 and labor operations 7001D and 7001D14.

TSB 25-2622 ↗

FORD · 2026-01-17

Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Stuck in park * "Service Vehicle Soon" message in the instrument panel cluster (IPC) * Illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P07E6:71 stored in the secondary on-board diagnostic control module C (SOBDMC) This may be due to high ground resistance of the park pawl motor.

TSB 25-2455 ↗

FORD · 2026-01-16

This article supersedes TSB 25-2098 to update the Parts List. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Vehicle stuck in the park * Blinking P on the gear shift module (GSM) * P not illuminated in the IPC * Illuminated powertrain malfunction (wrench) indicator DTC P07E6 stored in the secondary on-board diagnostic module C (SOBDMC) This may be due to the park lock actuator. *****Additional Model Information: equipped with the Hybrid HF45 Transmission*****

TSB 25-2098 ↗

FORD · 2025-04-27

Some of the vehicles listed in the Model statement above with the Hybrid HF45 Transmission may exhibit at least one of the following conditions * Vehicle will be stuck in the park * Blinking P on the Gear Shift Module (GSM) * P not illuminated in the IPC * Illuminated powertrain malfunction (wrench) indicator DTC P07E6 stored in the Secondary Onboard Diagnostic Module C (SOBDMC) This may be due to an internal issue with the park lock actuator.

TSB 24-2193 ↗

FORD · 2024-09-18

Some 2023-2024 Escape vehicles equipped with a HF45 transmission may exhibit an illuminated powertrain malfunction (wrench) indicator with DTC P07E6 stored in the inverter system controller SOBDMC, the GSM will display a flashing P on the dial, the P on the instrument cluster is not illuminated, and the vehicle will be stuck in the park (P) position.

TSB 23-2249 ↗

FORD, LINCOLN · 2023-11-07

This article supersedes TSB 23-2120 to exclude Police Interceptor vehicles with column shift. Some 2018-2021 Expedition/Navigator and 2020-2021 Explorer/Aviator vehicles equipped with a 10R80/10R80 MHT or 10R60 (excluding Police Interceptor vehicles with column shift) may exhibit a momentary transmission neutral-out condition while in drive. Vehicle may also have diagnostic trouble code (DTC) P07E6 and/or P07E4 stored in the powertrain control module (PCM) or transmission control module (TCM) and/or a possible audible noise. This may be due to a leak in the park valve circuit. To correct the condition, follow the Service Procedure to inspect the park system hardware for wear or damage and replace the valve body separator plate with an improved valve body separator plate.

TSB 23-2120 ↗

FORD, LINCOLN · 2023-05-16

Some 2018-2021 Expedition/Navigator and 2020-2021 Explorer/Aviator vehicles equipped with a 10R80/10R80 MHT or 10R60 may exhibit a momentary transmission neutral-out condition while in drive. Vehicle may also have diagnostic trouble code (DTC) P07E6 and/or P07E4 stored in the powertrain control module (PCM) or transmission control module (TCM) and/or a possible audible noise. This may be due to a leak in the park valve circuit. To correct the condition, follow the Service Procedure to inspect the park system hardware for wear or damage and replace the valve body separator plate with an improved valve body separator plate.

TSB 22-2145 ↗

FORD, LINCOLN · 2022-06-28

Some 2018-2021 Expedition/Navigator and 2020-2021 Explorer/Aviator vehicles equipped with a 10R80/10R80 MHT or 10R60 may exhibit a momentary transmission neutral-out condition while in drive. Vehicle may also have diagnostic trouble code (DTC) P07E6 and/or P07E4 stored in the powertrain control module (PCM) or transmission control module (TCM) and/or a possible audible noise. This may be due to a leak in the park valve circuit. To correct the condition, follow the Service Procedure to inspect the park system hardware for wear or damage and replace the valve body separator plate with an improved valve body separator plate.

SSM 50617 ↗

FORD, LINCOLN · 2022-03-18

Some 2020-2022 Edge ST and Nautilus vehicles equipped with an 8F57 transmission built on or before 18-Mar-2022 may exhibit a return to park when shifting to drive or reverse with an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTCs) P2707 stored in the powertrain control module (PCM). This vehicle may also have P0761 and/or P07E6 and/or P2705 in the PCM. This may be due to an F (2, 8) clutch piston. To correct this condition, inspect the F (2, 8) clutch piston for damage to the rubber sealing surface. Refer to Workshop Manual (WSM), Section 307-01. For claiming, use causal part 7D402 and applicable labor operation in Section 07 of the Service Labor Time Standards (SLTS) Manual.

TSB 21-2331 ↗

FORD · 2021-09-27

Some 2021 Bronco Sport vehicles built on or before 01-Aug-2021 may exhibit a shift system fault warning displayed in the instrument panel cluster (IPC). The vehicle may also exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0708, P0709, P2803, 2804 and/or P07E6 in the powertrain control module (PCM). This may be due to software calibration. To correct the condition, follow the Service Procedure to reprogram the PCM.