Skip to content

P0A7E · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P0A7E ← What does this code mean?

4 Results

0803721 ↗

RAM · 2021-03-16

Flash: Hybrid Control Processor (HCP) Updates This bulletin involves updating the HCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs). P1A26-00 - BPCM Hybrid Battery State Of Charge Performance. P0A7E-00 - Hybrid/EV Battery Pack Over Temperature. U1003-00 - ESP Can C Bus Performance. P2534-00 - Ignition Switch Run/Start Position Circuit Low. P0506 - Idle Speed Performance Lower Than Expected. P0507 - Idle Speed Performance Higher Than Expected. One Trip DTC Changed to a Two Trip DTC.P0AC6-00 - Hybrid/Ev Battery Temperature Sensor 2 Circuit Performance. P0ACB-00 - Hybrid/Ev Battery Temperature Sensor 3 Circuit…

08-037-21 ↗

RAM · 2021-03-16

Flash: Hybrid Control Processor (HCP) Updates This bulletin involves updating the HCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs). P1A26-00 - BPCM Hybrid Battery State Of Charge Performance. P0A7E-00 - Hybrid/EV Battery Pack Over Temperature. U1003-00 - ESP Can C Bus Performance. P2534-00 - Ignition Switch Run/Start Position Circuit Low. P0506 - Idle Speed Performance Lower Than Expected. P0507 - Idle Speed Performance Higher Than Expected. One Trip DTC Changed to a Two Trip DTC.P0AC6-00 - Hybrid/Ev Battery Temperature Sensor 2 Circuit Performance. P0ACB-00 - Hybrid/Ev Battery Temperature Sensor 3 Circuit…

PIP4992C ↗

BUICK, CHEVROLET · 2016-03-30

This Preliminary Information communication provides information to the technician some vehicles may have a drive motor generator, battery control module and cooling fan may become inoperative due to low system voltage. There may have been a charging system message, battery warning lamp or service hybrid system message displayed and may have Diagnostic Trouble Code P0C32 and or P0A7E. If the voltage level drops to a predetermined level approximately 9 direct current volts use Global Diagnostic System 2 to command the battery pack cooling fan motor on to make sure it operates. If the fan does not operate it will need to be replaced. Technician may need to run the vehicle through several drive cycles to ensure that there is not another root cause for the low voltage condition. Technician…

ASI-45147 ↗

FORD, LINCOLN, MERCURY · 2015-05-01

LINCOLN/FORD: SOME VEHICLES WILL EXPERIENCE, IN HOT EXTREME AMBIENT TEMPERATURES, A STOP SAFELY NOW OR A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED IN PRESENT OF BATTERY ENERGY CONTROL MODULE (BECM) DTC P0A7E AND BECM NEEDS REPLACED, AND REPROGRAM. MODEL 2010-12 FUSION, MILAN, MKZ. *PE