Skip to content

P0D6D · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P0D6D ← What does this code mean?

4 Results

07-002-26b ↗

MAZDA · 2026-07-17

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 07-002/26 06/16/26 and 06/10/26 DESCRIPTION Some customers may complain that the A/C does not cool. This concern may be due to an internal short circuit in the A/C compressor, caused by an overcurrent. On some vehicles, the A/C high-voltage fuse opens and DTC P0D6D and/or U0605 are stored. To eliminate this concern, the electrical circuit of the A/C compressor has been modified to prevent a short circuit even if an overcurrent occurs. Replace the A/C compressor with an updated one according to the procedure in MGSS (ELECTRIC COMPRESSOR REMOVAL/INSTALLATION [e-SKYACTIV PHEV]).

07-002-26a ↗

MAZDA · 2026-06-17

07-002/26 06/10/26 DESCRIPTION Some customers may complain that the A/C does not cool. This concern may be due to an internal short circuit in the A/C compressor, caused by an overcurrent. On some vehicles, the A/C high-voltage fuse opens and DTC P0D6D is stored. To eliminate this concern, the electrical circuit of the A/C compressor has been modified to prevent a short circuit even if an overcurrent occurs. REPAIR PROCEDURE 2. Replace the A/C compressor with an updated one according to the procedure in MGSS (ELECTRIC COMPRESSOR REMOVAL/INSTALLATION [e-SKYACTIV PHEV]).

07-002-26 ↗

MAZDA · 2026-06-11

DESCRIPTION Some customers may complain that the A/C does not cool. This concern may be due to an internal short circuit in the A/C compressor, caused by an overcurrent. On some vehicles, the A/C high-voltage fuse opens and DTC P0D6D is stored. To eliminate this concern, the electrical circuit of the A/C compressor has been modified to prevent a short circuit even if an overcurrent occurs. REPAIR PROCEDURE 2. Replace the A/C compressor with an updated one according to the procedure in MGSS (ELECTRIC COMPRESSOR REMOVAL/INSTALLATION [e-SKYACTIV PHEV]).

2067185/1 ↗

BENTLEY · 2022-06-09

HV battery will not charge - DTCs stored in address 19 (C11C5F2) and address C6 (P0D6D00) for the High Voltage System. Customer statement / workshop findings HV battery not charging and the following DTCs are stored: Gateway (19) - C11C5F2 High Voltage System wiring circuit 2 open and - U112300 Databus error value received Thermal management (C5) - P0D6D00 A/C compressor motor voltage low Technical background Internal harness failure of the High Voltage cable between the HV battery and the On-board charger