Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer communications
18Original wording in English
AUDI
Supersedes Technical Service Bulletin Group 01 number 13-07 dated June 21, 2013. The MIL is on. DTCs are stored in the engine control module (ECM). The faults listed above are caused by an incorrect software setting and can occur under certain driving conditions. In some scenarios, such as extended idling or heavy stop-and-go tr…
AUDI
Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine perform…
AUDI
MIL on, DTC P112800 and/or P113000 or P008700 or P244000 and/or P244200 in ECM
AUDI
Supersedes Technical Service Bulletin Group 24 number 12 ? 35 dated August 1, 2012. MIL on with one or more DTCs. DTC P112800 and/or P113000 or P008700 or P244000 and/or P244200 in ECM.
Check vehicle applicability
187A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Code meaning and manufacturer information
Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.
Lack Of HO2S Switch – Adaptive Fuel At Limit
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.